Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Povidone or Polyvinylpyrrolidone and Povidone-Iodine or PVP-I or Poly(vinylpyrrolidone)–Iodine complex Manufacturers made in a FDA-GMP-GLP plant is offered.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

----------

Povidone-Iodine or PVP-I or Poly(vinylpyrrolidone)–Iodine complex SDS MSDS Sheet of Manufacturers

Povidone-Iodine or Polyvinylpyrrolidone-Iodine Complex USP Grade manufacturers.

Povidone-Iodine or Polyvinylpyrrolidone-Iodine Complex BP Ph Eur Grade manufacturers.

Povidone-Iodine or PVP-I SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

Section 1 - Chemical Product and Identification

Product Name/Synonyms: Povidone-Iodine or PVP-I or Poly(vinylpyrrolidone)–Iodine complex
CAS Number: 25655-41-8
EINECS EC Code: 607-771-8 or (918-309-2)
Chemical Formula: (C6H9NO)n-xI
Molecular Weight: Variable

Section 2 - Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements NONE

Signal Word: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Section 3 - Composition, Information on Ingredients

Product Name/Synonyms: Povidone-Iodine or PVP-I or Poly(vinylpyrrolidone)–Iodine complex
CAS Number: 25655-41-8
EINECS EC Code: 607-771-8 or (918-309-2)

Section 4 - First Aid Measures

Always seek medical advice after the first aid treatment.

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash mouth out with water.
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically.

Section 5 - Fire Fighting Measures

General Information: Water runoff can cause environmental damage. Dike and collect water used to fight fire. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products.
Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
Special hazards arising from the substance: Hydrogen iodide, Ammonia and Nitrogen oxides, Toxic fumes.

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing.
Spills/Leaks: Absorb spilled liquids in suitable inert material such as clay, vermiculite or diatomaceous earth. Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dust/mist conditions. Provide ventilation. Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so.

Section 7 - Handling and Storage

Handling: Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
Personal Protective Equipment:
Eyes: Wear safety glasses with side shields.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Good general ventilation should be sufficient to control airborne levels. Facilities storing or utilizing the material should be equipped with an eyewash facility and a safety shower.
Exposure Limits: Not listed.

Section 9 - Physical and Chemical Properties

Physical State: Liquid.
Appearance: Brown liquid
Odor: Typical.
pH: 3 to 6.5
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Melting Point: Not available.
Decomposition Temperature: Not available
Explosion Limits: Not available.
Solubility: Soluble in water.
Specific Gravity/Density: Between 1 and 1.1.
Chemical Formula: (C6H9NO)n-xI
Molecular Weight: Variable

Section 10 - Stability and Reactivity

Chemical Stability: Stable.
Conditions to Avoid: High temperatures, light, exposure to moist air or water, strong acids, strong oxidizing agents.
Hazardous Decomposition Products: Toxic fumes of iodine or hydrogen iodide and ammonia and nitrogen oxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information

LD50 Oral - Rat - Not available
LD50 Dermal - Rat - > 2.500 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Teratogenic: No information reported.
Neurotoxicity: No information reported

Section 12 - Ecological Information

Toxicity to fish: static test LC50 - Leuciscus idus (Golden orfe) - 4,6 - 10 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 2,79 mg/l - 48 h
Mobility in soil: No information reported.
Persistence and degradability: No information reported.
Results of PBT and vPvB assessment: No information reported.
Other adverse effects: Discharge into the environment must be avoided.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.

Section 14 - Transport Information

DOT (USA) & ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods

Section 15 - Regulatory Information

USA Regulations:
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: Not listed.

Section 16 - Additional Information

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Povidone-Iodine or PVP-I or Poly(vinylpyrrolidone)–Iodine complex BP Ph Eur Grade Manufacturers

Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.

Copyright and Usual Disclaimer is Applicable February 5, 2022